DNS Server Archives - WunderTech

AdGuard Home OpenMediaVault Setup Tutorial!

Today we are going to install AdGuard Home on OpenMediaVault using Docker and Portainer.https://youtu.be/8Wzx3QuVcj0AdGuard Home is fairly straight forward to set up on OpenMediaVault and we will be using Portainer to configure it. Portainer is a web interface that manages docker containers, so it’s a powerful tool to get accustomed to using!Before we get started, it is incredibly important to note that having redundant DNS servers is very important. I highly suggest that you purchase…

36 Comments

November 19, 2020

OpenMediaVault

How to Set Up Pi-Hole on OpenMediaVault!

Today we are going to install Pi-hole on OpenMediaVault using Docker and Portainer. https://youtu.be/kkFP46S2VEM Fortunately, OpenMediaVault makes it very easy to install Docker and Portainer. We will be installing Pi-hole on Portainer and using a macvlan network interface so that we don’t have any port conflicts with our OpenMediaVault instance. If you haven’t installed OpenMediaVault yet, you can learn how to do that here. Before we get started, it is incredibly important to note that…

102 Comments

November 5, 2020

How to Set Up Pi-Hole on OpenMediaVault!

Raspberry Pi

How to Install AdGuard Home on a Raspberry Pi

Today we are going to look at how to install AdGuard Home on a Raspberry Pi. https://youtu.be/FLwlQafM3RM In our last tutorial, we looked at how to install AdGuard Home on a Synology NAS. If you implemented that, you might be interested in implementing a secondary DNS server using AdGuard Home as well. There are various reasons why implementing a secondary DNS server is important. If you only have one Raspberry Pi, it might be a…

9 Comments

September 6, 2020

How to Install AdGuard Home on a Raspberry Pi

Synology

How to Install AdGuard Home on a Synology NAS!

Today we are going to look at how to install AdGuard Home on a Synology NAS.https://youtu.be/oVu7wBTsA_gAdGuard Home is a network-wide ad-blocker and a competitor to Pi-hole. I have a few tutorials on how you can setup Pi-hole on a Raspberry Pi and Synology NAS, but this tutorial will focus on installing AdGuard Home on a Synology NAS. Synology NAS: AdGuard Home versus Pi-hole The first and logical question will be “which is better?”, as both…

86 Comments

September 3, 2020

How to Install AdGuard Home on a Synology NAS!

Synology / Xpenology

How to Setup Pi-hole on a Synology NAS

Today we are going to look at how to setup Pi-hole on a Synology NAS.https://youtu.be/4Z9Mtpc7TakWe will be looking at two different methods that both use Docker to install Pi-hole on a Synology NAS. The first method we are going to look at is “easier” and should be used if you don’t want to SSH into your NAS. This method utilizes the host network interface. The second method requires you to SSH into your Synology NAS…

102 Comments

August 9, 2020

Raspberry Pi

How to Install Pi-hole on a Raspberry Pi

These instructions will explain how to install Pi-hole on a Raspberry Pi. https://youtu.be/a86D9AbOTbU How to Install Pi-hole on a Raspberry Pi - Instructions I have this configured on a Raspberry Pi Zero W and it runs perfectly!Before we get started, ensure that you can SSH into your Raspberry Pi with a valid Raspberry Pi operating system. If you aren’t sure how, please follow these instructions. There are two main ways to install Pi-hole: an automated installer or…

Comments Off

June 6, 2020